Showing posts with label Triumph. Show all posts
Showing posts with label Triumph. Show all posts

Tuesday, March 5, 2019

Kudos to Triumph for excellent Customer service....


This is just a quick post, coupled with an apology.  I haven't written much in the last 5 weeks or so, however I have been very busy!  Please watch this space for my ten year anniversary of Hinkley Triumph ownership and a whirlwind of Matchless updates.

I meant to get to this one last month, however my hands were otherwise occupied.

Katie's fork boots were starting to dry out and tear at the end of the last riding season, requiring some replacements.  I looked around at British customs, Ebay and a variety of other sources.  

Then I finally did what I should have from the get-go.  Go to Triumph directly.  The cost was so low ($22.00 or so) that I thought it was per boot and ended up ordering an extra set.  These were quickly shipped for free dealership pick up and were extremely well packaged.  To my amazement, I was given a free gift which I assumed would be a sticker of some sort.  It was in fact, a baseball hat.  As if this weren't enough,  there was a return shipping label enclosed (in the event of an issue) and label proudly proclaiming that the boots were made in England (note the MADE in the UK all in caps to emphasize the point).  Needless to say, I will be taking this route for all my new parts needs going forward.

The inner boxes were half the size!



Until next time! 

Tuesday, January 8, 2019

Electrolytic Rust Removal

Unless I've miscounted, this would be rust removal method number four that I have written about on this blog.  We had Oxylic acid (wood bleach), white vinegar and molasses.  While these methods all work very well, they have some serious downsides.  The biggest is time;  One has to be quite patient and have the ability to wait days or even weeks for rust to disappear.  Mess and odour are another, that is most specific to Molasses and vinegar (to a lesser degree).  Thirdly, weather and temperature are factors.  If you have a cold shop or garage, these processes are almost impossible to undertake in the wintertime as your solution will freeze. 


This brings us to electrolytic rust removal which I finally got around to trying.  A method that is quick, relatively clean and can be done in cooler temperatures.  I won't do a seminar about the science of it as there are far better and more detailed write ups out there.  This is more a matter of sharing the results.


My specimen was an old 650 Triumph crankshaft.

Not the best picture as I had just cleaned and de-greased it.

It took me about six minutes to set up a simple system. 

-1 Home Depot bucket
-1 cup of Arm and Hammer Washing soda (this is very important.  It must be washing soda, not baking soda or laundry detergent)
-Hot water
-Piece of Wood
-Metal Strapping
-Old scrap metal shears (to use as a Cathode)
-Old Battery Charger (set to 12V)





I mixed my washing solution in the hot water, attached the strapping to the crankshaft (in order to keep it suspended).

I then attached the positive lead to the sacrificial shears, negative lead to the Crankshaft-

As soon as the charger was turned on the water began to gently bubble.  After half an hour it looked like this:



After two hours I pulled the crankshaft out.  Lo and behold, the rust was gone! 

Not the best photo, as the crank is still wet.  The rust was however, gone.


I then used a sponge brush covered in oil to protect the part in storage. 

The verdict?  Going forward, this will be my go-to method.  Easy, inexpensive and most importantly, fast. 

Until next Time....

Friday, May 11, 2018

My YouTube Channels of choice....


I am a huge fan of YouTube.  The idea that anyone, anywhere at anytime can create, edit and produce media for a worldwide audience is fascinating to me.  Growing up in a different era, the very idea of it would have been the stuff of science fiction.

That being said, there is a tremendous amount of dross that one must sift through to find gold.


Here are some of my top choices, which are in no specific order.


On Yer Bike



Presenter Paul Brodie travels to various bike shows around Britain, focusing on the custom scene primarily.  Many of the segments feature builder Craig Jones, a talented blacksmith who does some exceptional work.  The above video details the making of a hand-made licence plate frame for an Enfield.  While chopped bikes are not my favourite thing in the world, the presentation is great as are the production values.  



Britannia Motors 




Micheal Waller is an ex-pat who runs a small restoration business in Upstate NY.   Luckily for us, he has taken the time to document some of his work step by step.  If you are new to restoring British bikes, this is a great place to start.



Ed Willson's 1968 VW restoration




This video is a classic and a must see if you are contemplating the restoration of a Beetle.  With over million and half views, you may have already seen it!  Filmed and edited by son Max, Edd walks us through the process from beginning to end.  The car itself was up for sale (and presumably sold) for an eye-watering $15,500 USD.  The Willson clan have recently 'adopted' a worse for wear Austin Healey Sprite.  These videos in my opinion are the real stars, showcasing Edd's amazing fabrication skills. 


Hackaweek's Honda CB750 Restoration



Host Dean Segovis brings high energy and comprehensive detail to these restoration videos.  A CB360 is currently on the bench taking form as a scrambler which will no doubt prove as entertaining.


Mustie 1 



Apart from the over-use of the term 'Barn Find' (a term that needs to die for a while, much like 'patina') Mustie 1's videos are excellent viewing.   With a tremendous passion for anything mechanical, he will take on any project in an attempt to make it run.  This includes motorcycles, drills, cars and defunct generators most of which are found at yard sales.  Apparently he was offered a reality series, however the terms were less than desirable.  Good on him, as the last thing the world needs is more 'reality' shows.


Shedbuilt Dave



Shedbuilt Dave provides exactly what his name would imply; (To be clear it is unlikely Dave himself was created in a shed, but one never knows!) A man named Dave in his shed, building bikes.  For the home restorer Dave makes for an excellent mentor.  He utilizes rudimentary tools and old fashioned methods to create alchemy.  While I greatly enjoy Dave's work, I hope that one day he will invest in a better camera.


Lunmad




Lunmad is something of a quiet legend in the Triumph motorcycle community.  While his methods occasionally create a stir with the 'purists', the 'impure' have greatly benefited from his efforts.  His  humble and amusing presentation is a breath of fresh air in the sometimes maddening world of restoring old iron.


Until Next time.......



Tuesday, May 1, 2018

Weekend Swap Meet pick ups


With other priorities dominating much of 2017,  I didn't visit many shows or swap meets.
At the 11th hour on Friday,  I happened to be cruising the CVMG page and saw the Kitchener branch would be holding court at the Paris Fairgrounds the next morning.  I figured I should start making up for lost time.


I set out early, as one does to find the best items;  Armed with a modest cash budget and list of essentials in mind, I kept my expectations low.  

Despite the intermittent heavy rain, the number of vendors was fairly high and diverse.  What did surprised me was the lack of project bikes for sale.   Not a concern for me, as the Inn is currently beyond capacity! 

There was one exception and it was certainly something not seen very often, this 1929 Harley Davidson JD project.  Considering the age and how much of the bike is present, someone should be able to restore to former glories.



At the end of the day, I made out quite well and far better than expected.  Below, I humbly present my 'haul'. 



It may not look like much, however these are all items that I had hoped to find and more importantly, needed.  

2 x Shorty/cocktail shaker mufflers (purchased for $2.00!)  I have never seen shorties with flared ends before.  The chrome is actually quite decent.

12 x Tools:  Several slimline wrenches, a NOS American made chain tool, Dunlop tyre spoons, Craftsman wrench, home made Triumph clutch tool, very old flint for welding and a mystery tool.  

1 x Bag of random British fasteners with nuts, always handy.

3 x original handlebar switches, all in excellent shape.  1 x Ducon, 1 x Miller and 1 x Lucas.

2 x Ewarts fuel taps with new components.  I was really surprised and delighted to find these as mine are but trash.  



All in all, a very worthwhile Saturday morning and I will be sure to attend next year.

My next post will reflect some project updates, until next time! 




Tuesday, January 24, 2017

Triumph Bonneville Bobber Launch Party....!





Welcome to my 50th post!  When I started four years ago, I had no idea how long or how much I would end up writing.  I just knew that I had thoughts, ideas and dreams that I wanted to take to paper (the virtual kind) for the sake of prosperity.  A lot has changed since then;  I have moved, found a good job and gotten married.  The bikes have changed as well,  moving from some Japanese bikes to an all British stable (and one German car).  I am very happy with things and have high hopes for the future!  Throughout 2017 I will have some long overdue updates;  Even though there may be long gaps between posts sometimes, there are always things going on in the background.

It seems appropriate that the topic of a 50th post should be about a party.  Not just any party, but a Triumph party!

I was invited to the launch of the Triumph Bonneville Bobber event last Friday at the Canadian Warplane Heritage Museum.  This was on the merit of having purchased a new bike from my local dealer a few years ago, however it is still nice to be asked out! 

It was a very well planned event, everyone got a free drink and trays of hors d'ourves were available to guests.  I always love seeing new bikes and for me the street scrambler and T120 Bonneville (in red and silver) were the stars of the show.  Triumph clearly have an ear to the ground and a keen eye on the budding custom scene of the last few years.  My beloved Scrambler was due for an upgrade after a decade, especially with Ducati and Yamaha throwing their hats in that arena.  The bike fits the bill nicely, I won't go into technical detail here but from what I have read the bike is a winner.

I do grow tired of the drab, matte paint schemes. Where is all the glorious two tone paint?  Thankfully on the T120 it is abundant and stunning from every angle.  This to me is the true measure of Triumph's success. Showing us all that can be whilst remembering all that was.  

As for the Bobber that all the fuss was about?  It was nice, but didn't really excite me although the crowd certainly loved it and I suppose that is the most important thing.   I will let the pictures do the talking for me...





An old friend met me at the gate.









There was no expense spared with the 2017 catalog, very high quality  glossy paper was used. 




Who doesn't love Snoopy?  This would look great on a gas tank...

Quite a pleasant paint scheme up close


Triumph has a new Bobber, apparently. 



Easily the most beautiful bike in the room...

The Triumph bus parked behind the main stage

The Bonneville Black.  It certainly delivers what it promises!

And again



Fortunately I didn't need this to escape the venue!





Beautiful from every angle. 
Until Next time!

Wednesday, October 12, 2016

Scrambler winter checklist....!

So the time has come. My beautiful Katie has a few miles on the clock and now needs some freshening up.

I have already started the process by ordering another set of superbars (chrome) from NewBonneville.    These are what I have grown accustomed to over the last 5 years, the stock bars not working for me and my makeshift solution too cruiser-like.

Now what?   At 32K it is definitely time for chain and sprocket replacement.  The teeth are starting to wear and I have noticed the decrease in output to the rear wheel.   I am looking at the following kit:

Scrambler chain and sprocket kit

Cost:  $264.00 Canadian

Rear shocks;  Mine aren't exactly worn,  however I have noticed a decline in sharpness.  Also, some patches of rust have formed on the chrome....Not acceptable!

Hagon Shocks

Cost:  $290.00 Canadian


New Seat

Cost:  $400.00 Canadian

My poor old seat cover is fading away and starting to lose a bit of shape.  I intend to keep going  into my golden years and frankly comfort can be an issue on long rides.  I like the look of this one and the reviews are good.




Cost: 160.00 Canadian 

The one I have now has some scratches and is plastic.  It looks the part, however I have longed for a polished item since the day I brought her home! 

Total costs:  $1114.00.   Needless to say that will have to be spread out over several months.


Other jobs?  Bleed the brakes and fill with new fluid, oil change and spark plug check.  I will also do some detailing and finally get that damned dent pulled out of the tank!  I have started and made some progress but it takes a lot of work.  


Until next time....

Tuesday, July 19, 2016

After the Fall....


Well it happened.

Flashback to the Friday before last, wet ground, misapplied brake (I believe) and down I went.

As far as accidents go it was relatively minor and I am merely bruised, so I certainly count my blessings!

I was however reminded of just how vulnerable we as riders truly are.   I only fell and slid a couple feet but caused the following damage:


-My helmet is likely no good anymore (as my head hit the pavement), so I will need to find another Davida Jet ($$$).

-The clutch lever snapped,  luckily I found an OEM one for a good price on Ebay.

-The handlebars were twisted and bent and are now scrap. I was actually surprised how light and thin they turned out to be.  I think they had come from British Customs or New Bonneville.  I didn't want to wait for another pair so I modified an old set of 1966 TR6 bars that were gathering dust.  I cut two inches off of either end to get the right fit.

-The brake reservoir (which seemed to have succumbed to UV damage and was quite brittle) snapped at the base. Once again it was Ebay to the rescue.

-My foot lever was damaged, I ordered an aftermarket replacement that looked good but was unfortunately flimsy.   I ended up sanding out the damage to the lever, drilling out the broken pin and using an M8 40mm bolt and some copper pipe inside the salvaged rubber.

The tank has a dent from the bars on the top which I hope to rectify with a dent puller.  As you might have guessed, there will be a full product review of said dent puller in an upcoming post.

Lastly, my clutch cover is scratched so it will need replacement.  In the interim I will wet sand to smooth out, then paint.

While I spent several hours adjusting and fettling,  I decided that now would be a good opportunity to install the progressive fork springs purchased in 2010!

In my defense, these were in storage and I only uncovered them recently.

Between the bars and the springs, it almost feels like a different bike.  The riding position is quite comfortable, more akin to a cruiser.  The front forks soak up much more of the road, by comparison to the old it feels like an air mattress.  I have to say that after a day of adjustment I really love the new feel, however I seem to have sacrificed the nimble turning stance I had previously.

As I mentioned earlier, the replacement parts were ordered through Ebay and shipped to the US for pick up.  There are several reasons for this:

The biggest reason being that my local shop doesn't seem to stock any parts anymore.  Not even a nut, bolt or pin.  In the event that you do need a part, you are looking at a 2 week turnaround.

It seems the days of shops having inventory (sundries) is a bygone one. Sad.

The second reason is the postal service here in Canada.  Ours has had looming job action for some time over a pension dispute.  This has left residents unsure of when or if items sent would be delivered at all.   

Speed and cost.  Shipping within the US is cheap, fast and sometimes free!  Packages that would normally take 2 weeks to get to me from say, California arrive in Niagara Falls, NY within 3 days.  

I found an exceptional service near the border called US Address at 3909 Witmer Road in Lewiston.
They charge a flat fee of $5.00 for each package under 50 lbs.

US Address




All told, this post could have been worse or not been at all.  I am renewed with gratitude to be back on the road and in one piece.













Tuesday, May 31, 2016

Black, Red and the one I built earlier...

Black or Red?


That is my question this week in regards to the Matchless project.  I have had the frame cleaned up and powder coated, secured a nice Lycett seat and acquired a new wiring harness.  The cylinder is in the shop and I have secured a replacement fork tube.

I also spent a painstaking amount of time sorting out all the nuts, bolts and washers and studs.  Of course I had to clean the really rough stuff, making my tumbler and invaluable tool!

The workbench has since been cleaned up.....substantially!


So what colour do I make the tanks and tool box?  



Or






I will reveal my choice soon...


The one I built earlier...

While cleaning my garage I found a plethora of old photographs;  I was very pleased to find this one.  To the best of  my knowledge, this is the only surviving photo of my 1969 Triumph Daytona, made entirely from a big pile of parts (sound Familiar?)



This would have been circa 1998,  about three years before I sold it.   I never did get it to run properly and only really rode it a handful of times.  If I had it now, the story would be much different.  

I had been after a British bike for a few years, in earnest since 1994.  I didn't know much about them other than what I read in this excellent series of books at the school library a few years before that. 

These are a fantastic resource that I still see at swap meets...pick them up if you have the opportunity!

For me, nothing else would suffice.  My poor old Yamaha Maxim seemed sad and ugly by comparison,  with it's cast wheels and plastic accouterments.  In all fairness, that $50.00 motorcycle served me well and I was lucky to have it.  I gained a taste for the two wheeled life that was never going to let me go.

There seemed to be a lot of basket cases around back then for a few hundred dollars.  I missed out on a Matchless (what model I don't know now)  for $350.00 by one day.  I missed out on a '59 Tiger Cub (for $600.00 Running!)  by an hour.  Luck seemed to be against me.   Another year passed,  I briefly owned a Vespa 100 which was fun but not for me.  I had heard about a shop on Sorauren Avenue in Toronto called the Rocker Box that repaired old British bikes and may have some for sale.   The first part was true enough  however the latter wasn't.  

The owner (Doug?) was polite enough and answered my questions about the bikes in the shop.  There were Triumph's, BSA's,  AMC products, even an Ariel or two.  I was certainly in heaven, to him however I was probably just some young guy burgling his time. 

He was kind enough to give me the phone number of a friend who had 'a few' projects lying around.  

That is a story for another day....











Sunday, April 3, 2016

Firth Motorcycles 1951 Catalogue!

I have managed to source several vintage Firth Motorcycle catalogues (all from the same owner!) which I will share on the blog as I get them scanned and edited.

These to me, are a fascinating snapshot of life many moons ago and also a great way to identify mystery aftermarket parts.  

Just for fun I have included a link to an inflation calculator so you can convert 'then' prices to 'now' money.


A 350cc Matchless single would run you $5,160.45 in 2016, good value for money and about what you would pay for a new Royal Enfield Bullet.

Enjoy!